You will need to make sure its compatible with the network 1st.
You can simply use your own pager and enter your CapCodes into our system.
You can also buy a pager from us. We will setup and program the pager for you. (Coming Soon).
Apollo makes great, keypad programmable pagers that work with our system. Make sure you get the board that will cover the 144 Mhz range. They will also do a board swap to the correct band to $15-20. These are the easiest pagers to setup and use, as they dont require and special software and are keypad programmable. Software is optional and will allow programming of special features.
Pagers we are testing or looking at:
Motorola Advisor Gold - There are 2 types of this model, crystal and synthesized. The only way to tell the difference (that I know of) is to either open up the pager and look at the RF board, or to read it in the software. The crystal version uses only 1 crystal, there is no IF crystal. The frequency marked on the crystal is multiplied by 3 to get the actual frequency. The crystal type needed is KXN-6460. They are about $20 each or $14 each with qty of 4+ from ICMFG.com. Make sure you get the POCSAG version.Motorola Advisor - I believe these are fully programmable, for capcodes and frequency. I have yet to test one. Make sure you get the POCSAG version.
Unication Advisor Gold - These should be fully programmable for frequency and capcodes. I have read that they will cover all the way down to 138 Mhz.